2020 Annual Water Use ReportSection 1: Facility Information
Section 2: Withdrawal Information2-A. Average daily withdrawal and maximum day withdrawal by month in million gallons per day (MGD)
2-B. Source Information - Please complete one row for each water withdrawal source. If any of your source information was imported from a previous year, please make sure you click edit and fill in the information left blank that is needed for the 2020 reporting year.
Section 3: Discharge Information3-A. Average daily discharge and maximum day discharge by month in million gallons per day (MGD)
3-B. Please complete one row for each discharge method. If any of your discharge information was imported from a previous year, please make sure you click edit and fill in the information left blank that is needed for the 2020 reporting year.
Section 4: Sub-Basin Transfer InformationComplete this section only if you withdraw or purchase water that is not returned to the sub-basin from which it was withdrawn. 4-A. Please complete one row for each transfer of surface water from one sub-basin to another. If any of your transfer information was imported from a previous year, please make sure you click edit and fill in the information left blank that is needed for the 2020 reporting year.
4-B. Enter the average daily and maximum day surface water transfer amount for each month in million gallons per day (MGD)
Do you have any comments?In section 2A, average daily withdrawal was also entered as the maximum daily withdrawal per guidance from John Barr for the 2015 report and therefore kept the same. The data is not collected on a daily basis. Well totalizers are read monthly. Pumping capacity is entered in 2B; however, is not used to calculate the maximum daily withdrawal as the site does not pump at max capacity. Wells are pumped at a steady rate throughout the month. In section 3B, the discharge capacity of 001 is listed as the same as the averaged discharged. There is no permitted limit on 001 outfall because the storm water also discharges through here. Well H2 ceased to operate in March 2020 and well OG2 ceased to operate in May 2020. Well C ceased to operate prior to 2020. All wells were properly abandoned. As of October 1, 2020, the new company name is INV Performance Surfaces, LLC, and INVISTA Wilmington Plant (Facility Name)
|